Home / Recruitment / GATE Aerospace Engineering Syllabus 2018 AE Syllabi Core/Special Topics

GATE Aerospace Engineering Syllabus 2018 AE Syllabi Core/Special Topics

GATE Aerospace Engineering Syllabus

GATE Aerospace Engineering Syllabus is provided here to prepare effectively in the entrance exam. GATE exam is conducted for providing admission in M.Tech/MS/PhD courses in IIT/NIT and other universities in India. All the candidates who are interested to appear for Graduate Aptitude Test in Engineering Exam can obtain GATE AE syllabi and start their preparations according to it. GATE AE Syllabus is divided into two categories that are Core/Special Topics. In Aerospace Engineering exam questions will asked from GATE AE Core topics and GATE AE Special topics. Interested applicants can go through GATE Aerospace Engineering Syllabus 2018 and download PDF also for GATE Syllabus.

Highlights Of this Page

GATE AE Syllabus Sections

Aerospace Engineering (AE) Syllabus

Syllabus for General Aptitude (GA)- Common for all

Allocation of Marks for Aerospace Engineering Exam

GATE Aerospace Engineering Exam Pattern

Tips To Score In GATE Exam

Procedure To Download GATE Exam Syllabus 2018

Direct Link To download PDF

Before starting up with your preparation for Graduate Aptitude Test in Engineering AE exam must go through GATE Aerospace Engineering Exam Pattern and get complete details about which section include maximum marks and then prepare for exam according to it. Go through the complete page that is maintained by the team of www.recruitmentinboxx.com and fetch complete information about GATE Syllabi and you can also download PDF of syllabus according to your subjects or stream from official page that is www.gate.iitr.ernet.in.

GATE AE Sections:

There are six sections that are included in GATE Aerospace Engineering Syllabus:

  • Engineering Mathematics
  • Flight Mechanics
  • Space Dynamics
  • Aerodynamics
  • Structures
  • Propulsion

Download PDF File For All Streams: GATE Syllabus 

Aerospace Engineering Syllabus 2018

Go through below section and grab Aerospace Engineering Exam syllabus. Prepare for only those topics which are included in GATE AE Syllabi 2018 which we have provided section wise. Go through it and check your syllabus for upcoming GATE Exams.

Important Note for Candidates who are preparing for Graduate Aptitude Test in Engineering Exams:

In each of the following section, subjects the topics have been divided into two categories that are

  • Core Topics
  • Special Topics

Corresponding sections of the question paper will contain 90% of their questions on Core Topics and the remaining 10% will be asked on Special Topics.

GATE Aerospace Engineering Syllabus

Section1: Engineering Mathematics

Core Topics:

Linear Algebra: Vector algebra, Matrix algebra, systems of linear equations, rank of a matrix, eigenvalues and eigenvectors.

Calculus: Functions of single variable, limits, continuity and differentiability, mean value theorem, chain rule, partial derivatives, maxima and minima, gradient, divergence and curl, directional derivatives. Integration, Line, surface and volume integrals, Theorems of Stokes, Gauss and Green

Differential Equations: First order linear and nonlinear differential equations, higher order linear ODEs with constant coefficients. Partial differential equations and separation of variables methods.

Special Topics:

Fourier Series, Laplace Transforms, Numerical methods for linear and nonlinear algebraic equations, Numerical integration and differentiation.

Must ReadTips to Crack GATE Exam

Section 2: Flight Mechanics

Core Topics:

Basics: Atmosphere: Properties, standard atmosphere. Classification of aircraft. Airplane (fixed wing aircraft) configuration and various parts;

Airplane performance: Pressure altitude; equivalent, calibrated, indicated air speeds; Primary flight instruments: Altimeter, ASI, VSI, Turn-bank indicator. Drag polar; takeoff and landing; steady climb & descent, absolute and service ceiling; cruise, cruise climb, endurance or loiter; load factor, turning flight, V-n diagram; Winds: head, tail & cross winds;

Static stability: Angle of attack, sideslip; roll, pitch & yaw controls; longitudinal stick fixed & free stability, horizontal tail position and size; directional stability, vertical tail position and size; dihedral stability. Wing dihedral, sweep & position; hinge moments, stick forces;

Special Topics:

Dynamic stability: Euler angles; Equations of motion; aerodynamic forces and moments, stability & control derivatives; decoupling of longitudinal and lateral-directional dynamics; longitudinal modes; lateral-directional modes.

Section 3: Space Dynamics

Core Topics:

Central force motion, determination of trajectory and orbital period in simple cases

Special Topics:

Orbit transfer, in-plane and out-of-plane

Also Check: GATE Previous Year Question Paper

Section 4: Aerodynamics

Core Topics:

Basic Fluid Mechanics: Conservation laws: Mass, momentum (Integral and differential form); Potential flow theory: sources, sinks, doublets, line vortex and their superposition; Viscosity, Reynold’s number.

Airfoils and wings: Airfoil nomenclature; Aerodynamic coefficients: lift, drag and moment; Kutta-Joukoswki theorem; Thin airfoil theory, Kutta condition, starting vortex; Finite wing theory: Induced drag, Prandtl lifting line theory; Critical and drag divergence Mach number.

Compressible Flows: Basic concepts of compressibility, Conservation equations; One dimensional compressible flows, Fanno flow, Rayleigh flow; Isentropic flows, normal and oblique shocks, Prandtl-Meyer flow; Flow through nozzles and diffusers.

Special Topics:

Elementary ideas of viscous flows including boundary layers; Wind Tunnel Testing: Measurement and visualization techniques.

Section 5: Structures

Core Topics:

Strength of Materials: States of stress and strain. Stress and strain transformation, Mohr’s Circle. Principal stresses, Three-dimensional Hooke’s law, Plane stress and strain; Failure theories: Maximum stress, Tresca and von Mises; Strain energy. Castigliano’s principles, Analysis of statically determinate and indeterminate trusses and beams, Elastic flexural buckling of columns

Flight vehicle structures: Characteristics of aircraft structures and materials. Torsion, bending and flexural shear of thin-walled sections. Loads on aircraft

Structural Dynamics: Free and forced vibrations of undamped and damped SDOF systems. Free vibrations of undamped 2-DOF systems

Special Topics:

Vibration of beams, Theory of elasticity: Equilibrium and compatibility equations, Airy’s stress function.

Get Here Complete: GATE Study Material

Section 6: Propulsion

Core Topics:

Basics: Thermodynamics, boundary layers and heat transfer and combustion thermochemistry.

Thermodynamics of aircraft engines: Thrust, efficiency and engine performance of turbojet, turboprop, turbo shaft, turbofan and ramjet engines, thrust augmentation of turbojets and turbofan engines. Aerothermodynamics of non-rotating propulsion components such as intakes, combustor and nozzle

Axial compressors: Angular momentum, work and compression, characteristic performance of a single axial compressor stage, efficiency of the compressor and degree of reaction.

Axial turbines: Axial turbine stage efficiency

Centrifugal compressor: Centrifugal compressor stage dynamics, inducer, impeller and diffuser.

Rocket propulsion: Thrust equation and specific impulse, vehicle acceleration, drag, gravity losses, multi-staging of rockets. Classification of chemical rockets, performance of solid and liquid propellant rockets

No Special Topics

Syllabus for General Aptitude (GA)


Verbal Ability: English grammar, sentence completion, verbal analogies, word groups, instructions, critical reasoning and verbal deduction.

Numerical Ability: Numerical computation, numerical estimation, numerical reasoning and data interpretation.

GATE Aerospace Engineering Syllabus

Graduate Aptitude Test in Engineering 2018

Allocation of Marks for Aerospace Engineering Exam:

Here distribution of marks for Aerospace Engineering Exam is provided below. Applicants can go through below section and get the details of distribution of topics according to their weightage in percent. Weightage in percent of main topics are provided, candidates can go through it and prepare more hard for those subjects which includes maximum percent of marks in GATE exam 2018.

Engineering Mathematics: Engineering Mathematics will have 13% of total marks weigh

General Aptitude: General Aptitude will have 15% of total marks weigh

Subject questions: Subject questions will have rest 72% of total marks weigh

GATE Aerospace Engineering Exam Pattern

In below section we have provided you section wise exam pattern you can go through it and can prepare according to it. Each subject includes certain number of marks in exams, so give more importance to those subjects which include maximum marks in examination. All the details regarding Graduate Aptitude Test in Engineering Exam is provided below go through it as it will be beneficial for you while qualifying in exams.

Sr. No.Section/PartDescriptionNumber of questionsMarking schemeMaximum marksTest Duration
1GAGeneral Aptitude questions, common for all the papers105 questions carrying 1-mark each,

5 questions carrying 2-marks each








3 hours

2Subject sectionThis section contains Multiple choice questions (four options will be given),

And numerical type questions (no options)

5525 questions carrying 1-mark each,

30 questions carrying 2-marks each


Get More Details onGATE Exam Pattern

Tips To Score In GATE Exam:

Graduate Aptitude Test in Engineering Syllabus is undoubtedly defined by the IITs and IISC in which IITs and IISC has covered each aspect regarding it. Before you begin with your GATE preparations, take a view on complete syllabus carefully. Now, when you have decided upon the paper you wish to appear for, contestants are advised to check out the syllabus for that particular paper only. Check out all topics section wise and prepare for exam according to it. Give more importance to those sections which carry more weightage in exams. Topics that are studied in graduation but are not in GATE syllabus can be left out by students.

Also, practice for exam with previous year question papers and sample papers as it will help you to know where you are lacking which subject needs more practice. Also, by practicing your confidence will increase with each paper you solved and you come to know your strengths and weaknesses. You can also prepare through online as previous year papers and guess papers are also provided. Go through it and prepare for exam according to it also keep a view on syllabus don’t go out of syllabus as it will waste your time and energy.

Steps To Download GATE Exam Syllabus:

  • Foremost step is to visit official website of Graduate Aptitude Test in Engineering that is www.gate.iitr.ernet.in.
  • Now, move cursor towards left side and select “Syllabi” over there.
  • PDF will appear, in which GATE Aerospace Engineering Syllabus is provided.
  • Candidates can go through it carefully and prepare for exams according to it.
  • Also, take hard copy of GATE Aerospace Engineering Exam Syllabus and keep it safe as it will be beneficial for you while you are preparing for exams.

Download PDF>>>GATE Aerospace Engineering (AE) Syllabus 2018


Candidates who wish to obtain other details GATE Aerospace Engineering Syllabus 2018 may check the above given Official Link. Contenders, we suggest you to stay linked with us by visiting our web portal regularly.

You May Also Like To Visit This Section

GATE Application FormGATE Result
GATE Admit CardGATE Eligibility Criteria
GATE Score CardGATE Cut Off
Top Engineering Colleges In IndiaEngineering Jobs Latest Vacancy 

Leave a Reply

Your email address will not be published. Required fields are marked *