Home / Question Paper / IES Previous Year Question Papers | ESE Last 5 Year’s Papers with Solution

IES Previous Year Question Papers | ESE Last 5 Year’s Papers with Solution

IES Previous Year Question Papers

For making your preparation stronger for Engineering Services Exam, you can take some help from IES Previous Year Question Papers. Candidates who solve ESE previous year question papers are more likely to crack the exam with good marks in comparison to others.

For interested contenders, we are providing some solved questions and ESE Last 5 Year’s Papers with Solution on this web page. You can download them by pressing the suitable links.

You Should Know This:

Attending online mock test is one of the best techniques to make your preparation better and it is recommended by some experts and toppers. By doing so, you will improve your knowledge and speed.

Further information about IES Previous Year Question Papers is mentioned below by the team of www.recruitmentinboxx.com.

IES Previous Year Question Papers

Some solved questions from Engineering Services Exam previous year question papers are available below for the convenience of candidates.

Question-1: The friction experienced by a body, when in motion, is known as

  1. rolling friction
  2. dynamic friction
  3. limiting friction
  4. static friction

Answer: Option 2

Question-2: The velocity ratio in case of an inclined plane inclined at angle θ to the horizontal and weight being pulled up the inclined plane by vertical effort is

  1. sin θ
  2. cos θ
  3. tan θ
  4. cosec θ

Answer: Option 1

Check Updated: IES Exam Pattern

Question-3: If the resultant of two equal forces has the same magnitude as either of the forces, then the angle between the two forces is

  1. 30°
  2. 60°
  3. 90°
  4. 120°

Answer: Option 4

Question-4: The range of a projectile is maximum, when the angle of projection is

  1. 30°
  2. 45°
  3. 60°
  4. 90°

Answer: Option 2

Question-5: The maximum frictional force, which comes into play, when a body just begins to slide over the surface of the other body, is known as

  1. static friction
  2. dynamic friction
  3. limiting friction
  4. coefficient of friction

Answer: Option 3

Get Here: Best Books for IES Preparation

Question-6: The algebraic sum of the resolved parts of a number of forces in a given direction is equal to the resolved part of their resultant in the same direction. This is known as

  1. principle of independence of forces
  2. principle of resolution of forces
  3. principle of transmissibility of forces
  4. none of these

Answer: Option 2

Question-7: Segmental chips are formed during machining

  1. mild steel
  2. cast iron
  3. high speed steel
  4. high carbon steel

Answer: Option 2

Question-8: If the diameter of the hole is subject to considerable variation, then for locating in jigs and fixtures, the pressure type of locator used is

  1. conical locator
  2. cylindrical locator
  3. diamond pin locator
  4. vee locator

Answer: Option 1

Get Complete Detailed: IES Syllabus

Question-9: Internal gears can be made by

  1. hobbing
  2. shaping with pinion cutter
  3. shaping with rack cutter
  4. milling

Answer: Option 2     

Question-10: The silicon carbide abrasive is chiefly used for grinding

  1. cemented carbide
  2. ceramic
  3. cast iron
  4. all of these

Answer: Option 4

Question-11: The work or surface speed for cylindrical grinding varies from

  1. 5 to 10 m/min
  2. 10 to 20 m/min
  3. 20 to 30 m/min
  4. 40 to 60 m/min

Answer: Option 3

Check Out: Best IES Coaching Centers

Question-12: The lip angle of a single point tool is usually

  1. 20° to 40°
  2. 40° to 60°
  3. 60° to 80°
  4. none of these

Answer: Option 3

Question-13: The lead screw of a lathe has __________ threads.

  1. single start
  2. double start
  3. multi-start
  4. any one of these

Answer: Option 1

Question-14: Lapping is an operation of

  1. making a cone-shaped enlargement of the end of a hole
  2. smoothing and squaring the surface around a hole
  3. sizing and finishing a small diameter hole
  4. producing a hole by removing metal along the circumference of a hollow cutting tool

Answer: Option 3

Question-15: In hot machining, tool is made of

  1. tungsten carbide
  2. brass or copper
  3. diamond
  4. stainless steel

Answer: Option 1

You Can Also Check: IES Civil Engineering Syllabus

Question-16: Pick up the correct statement from the following:

  1. Landing speed is directly proportional to the wing loading
  2. Wing loading remaining constant, the take off distance is directly proportional to the powder loading
  3. Neither (a) nor (b)
  4. Both (a) and (b)

Answer: Option 4

Question-17: The meterological condition which influences the size and location of an air port is

  1. atmosphere pressure
  2. air density
  3. reduced level
  4. wind direction
  5. all the above.

Answer: Option 5

Question-18: Conical surface of the approach area rises outwards

  1. 1 in 10
  2. 1 in 15
  3. 1 in 20
  4. 1 in 25

Answer: Option 3

Also Check: UPSC Study Material

Question-19: For Class A Air port the difference of reduced levels of higher and lower edges of the conical surface, is

  1. 25 m
  2. 50 m
  3. 75 m
  4. 100 m

Answer: Option 4

Question-20: From the end of an instrumental runway, the approach surface rises outwards

  1. 1 in 20
  2. 1 in 30
  3. 1 in 40
  4. 1 in 50

Answer: Option 4

ESE Previous Year Question Papers

IES 2018 Question Paper:

IES Civil Engineering Question PaperHit Here
IES Electrical Engineering Question PaperHit Here
Electronics and Telecommunication Engineering IES Question PaperHit Here
IES General Studies and Engineering Aptitude Question PaperHit Here
IES Question Paper for Mechanical EngineeringHit Here

IES 2017 Question Paper:

IES Previous Year Question paper for Civil EngineeringHit Here
ESE Previous Year question paper for Electrical EngineeringHit Here
ESE Mechanical Engineering Question PaperHit Here
IES Electronics and Telecommunication Engineering Question PaperHit Here

IES 2016 Question Paper:

Civil Engineering Question PaperHit Here
Mechanical Engineering PaperHit Here
Electrical Engineering IES PaperHit Here
Electronics and Telecommunication Engineering PaperHit Here

IES 2015 Question Paper:

ESE Question Paper for Civil EngineeringHit Here
ESE Paper for Mechanical EngineeringHit Here
Electrical Engineering IES Question PaperHit Here
Electronics and Telecommunication Engineering Question PaperHit Here

IES 2014 Question Paper:

ESE Civil Engineering Question PaperHit Here
Question Paper for Mechanical EngineeringHit Here
Electrical Engineering IES Question PaperHit Here
IES E and T Engineering Question PaperHit Here

How to Download IES Previous Year Question Papers:

  • Firstly, candidates need to visit the official website of Union Public Service Commission i.e. www.upsc.gov.in.
  • After that select “Examination” tab which is mentioned at the menu bar.
  • Choose “Previous question papers” option from the drop list.
  • Within few seconds you will be redirected on a new page.
  • Select the appropriate link in which subject you are interested.
  • A PDF file will be shown on your digital screen which contains UPSC IES Previous Year Question Papers.
  • Check it out and download the same.
  • At the end, take a hard copy of the Indian Engineering Services Exam Previous Year Question Papers for further use.

Press Here For IES Previous Year Question Papers Link

Interested individuals can download the ESE Last 5 Year’s Papers with Solution by hitting the available links. For better preparation, you can attend online mock test. This technique will improve your accuracy and knowledge.

Final Words:

Stay tuned with the team of www.recruitmentinboxx.com or follows us on social media to get latest updates on IES Previous Year Question Papers.

Clear your doubts regarding IES Question papers (if any) by write it in the mentioned below comment box, our experts will try their best to solve it.

You May Also Like To Check This Section

IES 2018 ExamUPSC ESE 2018 Exam
UPSC IES Application FormUPSC IES Result
IES Eligibility CriteriaUPSC IES Answer Key
UPSC NotificationUPSC Calendar

Leave a Reply

Your email address will not be published. Required fields are marked *