Home / Uncategorized / GAIL Placement Papers (Updated) Sample Question Paper with Answers pdf

# GAIL Placement Papers

Download Updated GAIL Placement Papers PDF from here!! GAIL (India) Ltd is one of the largest cross-country natural gas pipeline projects in the world. It laid the foundation for development of market for natural Gas in India. Every year, organization conducts the exam to recruit eligible candidates on different posts.

Updated GAIL Sample Question Paper with Answers can help the appliers to be familiar with the exam format as well as in preparation of the examination. Apart from it, you may download GAIL Placement Papers PDF also by going through this page easily.

Appliers for Jobs in GAIL are informed that below mentioned Question and Answers have been taken from the format of the GAIL Recruitment Exam. If you want more GAIL Placement Papers and Answers then hit the direct link which has been provided by www.recruitmentinboxx.com at below.

## GAIL Placement Papers

Question 1. The force required to move the body up the plane will be minimum if it makes an angle with the inclined plane __________ the angle of friction.

1. equal to
2. less than
3. greater than

Question 2. The total time taken by a projectile to reach maximum height and to return back to the ground, is known as time of flight.

1. Yes
2. No

Question 3. The range of a projectile is maximum, when the angle of projection is

1. 30°
2. 45°
3. 60°
4. 90°

Question 4. The mechanical advantage of a lifting machine is the ratio of

1. distance moved by effort to the distance moved by load
2. load lifted to the effort applied
3. output to the input
4. all of the above

Question 5. Static friction is always __________ dynamic friction.

1. equal to
2. less than
3. greater than

Practice Free Mock Test: Online Test Series

Question 6. A body will begin to move down an inclined plane if the angle of inclination of the plane is __________ the angle of friction.

1. equal to
2. less than
3. greater than

Question 7. When a particle moves along a circular path with uniform velocity, there will be no tangential acceleration.

1. Correct
2. Incorrect

Question 8. The bodies which rebound after impact are called

1. inelastic bodies
2. elastic bodies
3. neither elastic nor inelastic bodies
4. none of these

Question 9. What type of bearing is used for main bearings and connecting rod bearings ?

1. Ballbearings
2. Plain bearings
3. Needle roller bearing
4. Taper roller bearing

Question 10. It is necessary to maintain the valve clearances as they

1. reduce the resistance to sliding that occurs between the cam and the tappet
2. allow for lengthening of the valves owing to the heat of combustion
3. increase the speed at which the valves move up and down
4. make the crankshaft turn smoothly

Question 11: Rapping allowance is provided on a pattern to take care of

1. shrinkage
2. distortion
3. machining
4. easy withdrawal

Question 12: The friction experienced by a body, when in motion, is known as

1. rolling friction
2. dynamic friction
3. limiting friction
4. static friction

Get Here: IT Companies Placement Papers

Question 13: Two balls of equal mass and of perfectly elastic material are lying on the floor. One of the ball with velocity v is made to struck the second ball. Both the balls after impact will move with a velocity

1. v
2. v/2
3. v/4
4. v/8

Question 14: The velocity ratio in case of an inclined plane inclined at angle θ to the horizontal and weight being pulled up the inclined plane by vertical effort is

1. sin θ
2. cos θ
3. tan θ
4. cosec θ

Question 15: A body of weight W is required to move up on rough inclined plane whose angle of inclination with the horizontal is α. The effort applied parallel to the plane is given by(where μ = tanφ = Coefficient of friction between the plane and the body.)

1. P = W tanα
2. P = W tan(α + φ)
3. P = W (sinα + μcosα)
4. P = W (cosα + μsinα)

Question 16: The force required to move the body up the plane will be minimum if it makes an angle with the inclined plane __________ the angle of friction.

1. equal to
2. less than
3. greater than

Question 17: The range of a projectile is maximum, when the angle of projection is

1. 30°
2. 45°
3. 60°
4. 90°

START: Logical Reasoning Test

Question 18: The maximum frictional force, which comes into play, when a body just begins to slide over the surface of the other body, is known as

1. static friction
2. dynamic friction
3. limiting friction
4. coefficient of friction

Question 19: The distance, between the point of projection and the point where the projectile strikes the ground, is known as range.

1. Correct
2. Incorrect

Question 20: When a rigid body is suspended vertically, and it oscillates with a small amplitude under the action of the force of gravity, the body is known as

1. simple pendulum
2. compound pendulum
3. torsional pendulum
4. second’s pendulum

GAIL Sample Question Paper

1) The pitot tube is used to calculate the velocity of ?

2) To eradicate the over turning of the vehicle which has to be done. Reduce the mass, Reduce the Speed, Make the CG down for the vehicle.

3) Why governing is required in the turbine.

4) Why air vessel is placed in the reciprocating pump.

5) A problem on the blade speed of the impulse turbine.

6) The formula for the specific speed of the turbine.

7) What is the operation we perform in the CAD to fill the patches?

8) What is the meaning of cast iron SG 400/15

9) What happens to the cast iron rod when manganese is added to it.

10) The hardness of the cast iron bar can be increase which process.

11) Which type of fit is involved in G6/g7?

12) What happens to material in spinning operation.

13) Why multi-point cutting tool is used.

14) How can be directional solidification eradicated?

15) What type of welding is used to weld molen metal?

16) Two questions on stress concentration factor.

17) A question asked on the usage of keys.

18) Type of bolt used in heavy machinery.

19) A theatre providing e-icketing is maintained by which platform. This is the question related to management.

20) Three questions on gear mating.

21) If l/r ratio is increased what happens to its primary and secondary forces.

22) Maximum value of x power 1/x.

23) Slope of the curves Y= a power X and Y=b power X.

24) Which will have high COP value a. 20 deg super heat or b. 20 deg subcooled.

25) Given an equation for average velocity and asked to calculate the covective acceleration at a specified length.

GAIL Interview Questions

• Why should I hire you?
• What are your strengths and weaknesses?
• Why do you want to work at our company?
• What is the difference between confidence and over confidence?
• What is the difference between hard work and smart work?
• How do you feel about working nights and weekends?
• Can you work under pressure?
• Are you willing to relocate or travel?
• What motivates you to do good job?
• What makes you angry?
• Give me an example of your creativity.
• How long would you expect to work for us if hired?
• Are not you overqualified for this position?
• Describe your ideal company, location and job.
• What are your career options right now?
• Explain how would be an asset to this organization?
• What are your outside interests?
• Would you lie for the company?

Contenders are requested to subscribe free email service of this web portal that is www.recruitmentinboxx.com for getting latest information about GAIL Placement Papers through this page, so keep in touch with us regularly.  You can give your queries and suggestions in the comment box.

You May Also Like To Visit This Section

 GAIL India Recruitment GAIL Recruitment through GATE Sarkari Naukri- Latest Jobs More Government Jobs All Govt. Jobs By State Best Jobs in India

#### Important Sections

 Best College Scholarship in India Current Affair Career Options Online Quiz Syllabus Counselling Universities in India
• ### LPG gas price in Punjab | March 2024 | LPG Gas rate update | Gas cylinder price 2024

March 3, 2024
• ### SSC Salary 2024 | (CGL/CHSL/MTS/JE) Pay Scale After 7th CPC

March 3, 2024
• ### IBPS SO Salary 2024 in Hand | Allowances, Pay Scale After 7th CPC

March 3, 2024
• ### IAS Officer Salary 2024 – Per Month After 7th Pay, Allowances & Benefits

March 3, 2024
• ### Web Designer Salary 2024 | City Wise, Company wise, Experience & Fresher

March 2, 2024
• ### Software Engineer Salary [India] | Bonus/Profit Sharing | Pay Scale 2024

March 2, 2024
• ### Merchant Navy Salary 2024 India | Cadet/Captain Salary after 12th Per Month

March 2, 2024
• ### CCS University Back Paper Form 2023 BAMS Regular/Supplementary Exam: 2023

September 15, 2023
• ### IGNOU Assignments 2023 TEE Dec Solved Assignment Submission Date

September 15, 2023
• ### Vidyasiri Scholarship 2023 ePass Karnataka Application, Last Date

September 15, 2023

June 3, 2022
• ### How to Fill Online Application Form | 2023 Entrance Exam/RRB/Bank/UPSC

September 19, 2023
• ### MP ITI Counselling 2021 | 1st 2nd, 3rd Round Schedule, Seat Allotment

October 27, 2021
• ### Rajiv Gandhi National Fellowship 2022 SC/ST RGNF Application Last Date

June 20, 2022